Pepwave MAX, User Manual

Page: 67 / 121

http://www.pepwave.com 67 Copyright @ 2013 Pepwave
New Custom Rule Settings
Service Name
This setting specifies the name of the custom rule.
Enable
This setting specifies whether the outbound traffic rule takes effect.
With an Enable value of Yes , the rule takes effect: traffic is matched, and actions are
taken, by Pepwave MAX based on the other parameters of the rule.
With an Enable value of No , the rule does not take effect Pepwave MAX disregards the
other parameters of the rule.
Source
This setting specifies the source IP Address, IP Network or MAC Address for outbound
traffic that matches the rule.
Destination
This setting specifies the destination IP Address or IP Network or Domain Name for traffic
that matches the rule.
Domain Name
If Domain Name is chosen and a domain name, such as foobar.com, is entered, any
outgoing accesses to foobar.com and
*.foobar.com
will match this criterion. You may
enter a wildcard (.*) at the end of a domain name to match any host with a name having
the domain name in the middle. If you enter
.*,
for example, then www.foobar.com,
www.foobar.co.jp, or foobar.co.uk will also match. Placing wildcards in any other position
is not supported.
NOTE: if a server has one Internet IP address and multiple server names, and if one of the
names is defined here, then accesses to any one of the server names will also match this
rule.
Protocol and Port
This setting specifies the IP Protocol and Port of outbound traffic that matches this rule.
You may select some common protocol from the
Protocol Selection Tool drop-down
menu.