Pepwave MAX User Manual Download

Page: 48 / 121

http://www.pepwave.com

8.5

Bandwidth Allowance Monitor

Bandwidth Allowance Monitor helps keep track of your network usage.

Enable Bandwidth Allowance Monitor

Bandwidth Allowance Monitor

Action

If the feature Email Notification is enabled, you will be notified through email when
usage hits 75% and 95% of the monthly allowance.

If the box

Disconnect when usage hits 100% of monthly allowance

is checked, this

WAN connection will be disconnected automatically when the usage hits the monthly
allowance. It will not resume connection unless this option has been turned off or the
usage has been reset when a new billing cycle starts.

Start Day

This option allows you to define which day in the month each billing cycle begins.

Monthly

Allowance

This field is for defining the maximum bandwidth usage allowed for the WAN
connection each month.

Summary of Contents for MAX















































































































Search results

Summary of Contents for MAX

Reviews:

Related manuals for MAX

Brands by name

Popular brands

Pepwave MAX, User Manual

Search results

Summary of Contents for MAX

Reviews:

Related manuals for MAX

Brands by name

Popular brands