http://www.pepwave.com
82
Copyright @ 2014 Pepwave
NOTE
: if a server has one Internet IP address and multiple server names, and if one of the
names is defined here, then accesses to any one of the server names will also match this
rule.
Protocol and Port
This setting specifies the IP Protocol and Port of outbound traffic that matches this rule.
You may select some common protocol from the
Protocol Selection Tool
drop-down
menu.
Algorithm
This setting specifies the behavior of the Pepwave MAX for the custom rule.
One of the following values can be selected:
Weighted Balance
Persistence
Enforced
Priority
Overflow
Least Used
Lowest Latency
The upcoming sections present the details of the listed algorithms.
Terminate
Sessions on Link
Recovery
This setting specifies whether to terminate existing IP sessions on a less preferred WAN
connection in the event that a more preferred WAN connection is recovered. This setting
is applicable to the Algorithms:
Weighted
,
Persistence
and
Priority
.
By default, this is disabled. In this case, all existing IP sessions will not be terminated or
affected when any other WAN connection is recovered. If it is set to enabled, existing IP
sessions may be terminated when another WAN connection is recovered such that only
the preferred healthy WAN connection(s) are used at any point in time.
