Pepwave BR1 Slim User Manual Download Page 110

Page: 110 / 154

http://www.pepwave.com

110

20.2 PPTP Server

The Pepwave MAX has a built-in PPTP Server, which enables remote computers to conveniently and
securely access the local network.

PPTP server setting is located at

Advanced >Misc. Settings >PPTP Server.

Simply check the box to enable the PPTP server function. All connected PPTP sessions are displayed on
the Client List at

Status > Client List

. Please refer to section 23.3 for details.

PPTP Server Setting

Listen On

This setting is for specifying the WAN connection(s) and IP address(es) where the

PPTPserver should listen on.

Authentication

Select the source of user databases for PPTP authentication.

Local User Accounts

- User accounts are stored in the device locally. You can

add/modify/delete the accounts in the User Accounts table below, click

Add

to add a new

account.

LDAP Server

- Authenticate with an external LDAP server. Tested with OpenLDAP server

where passwords are NTLM hashed. Active Directory is not supported. (You can choose to

Summary of Contents for BR1 Slim





















































































































































Search results

Summary of Contents for BR1 Slim

Reviews:

Related manuals for BR1 Slim

Brands by name

Popular brands

Pepwave BR1 Slim, User Manual

Search results

Summary of Contents for BR1 Slim

Reviews:

Related manuals for BR1 Slim

Brands by name

Popular brands