http://www.pepwave.com
132
Copyright @ 2014 Pepwave
Configuration
Backing up the Pepwave MAX settings immediately after successful completion of the initial setup is
strongly recommended.
The functionality to download and upload Pepwave MAX settings is found at
System> Configuration
Configuration
Restore
Configuration to
Factory Settings
The
Restore Factory Settings
button is to reset the configuration to the factory default
settings. After clicking the button, you will need to click the
Apply Changes
button on the
top right corner to make the settings effective.
Downloading
Active
Configurations
The purpose of the
Download
button is to backup the current active settings. Click
Download
and save the configuration file.
Uploading
Configurations
To restore or change settings based on a configuration file, click
Choose File
to locate the
configuration file on the local computer, and then click
Upload
.
The new settings can then be applied by clicking the
Apply Changes
button on the page
header, or you can cancel the procedure by pressing
discard
on the Main page of Web
Admin Interface.
Uploading
Configuration from
High Availability
Pair
(Available on Pepwave MAX HD2 and MAX 700)
In a High Availability (HA) configuration, the MAX router can quickly load the configuration
of its HA counterpart. To do so, click the
Upload
button.
After loading the settings, configure the LAN IP address of the MAX router to be different
from the HA counterpart.
