http://www.pepwave.com
39
Copyright ©
5/23/16
Pepwave
User Manual
PEPWAVE
AP Series
ACK Timeout
Set the wait time to receive an acknowledgement packet before retransmitting. The default
value is 48
μs
.
Frame
Aggregation
With this feature enabled, throughput will be increased by sending two or more data frames in a
single transmission.
Aggregation
Length
This field is only available when Frame Aggregation is enabled. It specifies the frame length for
frame aggregation. By default, it is set to 50000.
Max number of
Clients
Enter the maximum clients that can simultaneously connect to your access point or set the value
to 0 to allow unlimited clients.
Client Signal
This field determines the minimum acceptable client signal strength, specified in
Strength
Threshold
megawatts. If client signal strength does not meet this minimum, the client will not be allowed
to connect.
Advanced Features
Discover Nearby
Check this box to enable network discovery. Note that setting Channel to Auto will
Networks
activate this feature automatically.
Scanning Interval
This setting controls the interval, in seconds, that your access point scans for nearby networks.
Scanning Time
This setting specifies the time, in milliseconds, that your access point scans any particular
channel while searching for nearby networks.
Scheduled Radio
Click Custom Schedule to specify radio availability schedule options or select Always
Availability
On to make the radio continuously available.
WMM
This checkbox enables Wi-Fi Multimedia (WMM), also known as Wireless Multimedia Extensions (WME),
on your access point. The default is enabled.