Pepwave AP One AC mini User Manual Download | Manualshive

Page: 21 / 58

background image

http://www.pepwave.com

21

Copyright ©

5/23/16

Pepwave

User Manual

PEPWAVE

AP Series

Language

Choose a language for the administration interface.

7.1.2

Firmware

The Firmware section lets you check the firmware version currently used by your access point, as

well as check for and install new firmware via online download. You can also upgrade your
firmware using a firmware file stored locally.

To check for new firmware, click the Check for Firmware button. If new firmware is available,

your access point will automatically download and install it.

To upgrade your access point using a firmware file on your network, click Choose File to select

the firmware file. Then click Manual Upgrade to initiate the firmware upgrade process using the
selected file.

Note that your access point can store two different firmware versions in two different

partitions. A firmware upgrade will always replace the inactive partition. If you want to keep the
inactive firmware, simply reboot your device with the inactive firmware and then perform the
firmware upgrade.

7.1.3

Time

The settings in this section govern the access point’s system time zone and allow you to specify

a custom timeserver.

Time

«
...
19
20
21
22
23
...
»

Summary of Contents for AP One AC mini



























































Reviews:

No comments

Related manuals for AP One AC mini

Brand: D-Link Pages: 20

Brand: D-Link Pages: 95

Brand: Paradyne Pages: 2

AirWorks AWK-3131-RCC Series

Brand: Moxa Technologies Pages: 78

Brand: Z-Com Pages: 38

Brand: Mercury Pages: 36

iConnectAccess 624W

Brand: Open Networks Pages: 2

AirGuard 3e-525C-2

Brand: 3e Technologies International Pages: 80

Brand: 3e Technologies International Pages: 104

Brand: 3e Technologies International Pages: 109

Brand: Allnet Pages: 14

Brand: q-Tech Pages: 12

Brand: Kingbird Pages: 9

Brand: Vivato Pages: 181

Brand: Ijinus Pages: 9

Brand: Ebyte Pages: 12

Brand: Vertex Wireless Pages: 38

Brand: BroadMobi Pages: 27

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands