20
27
57
2
02
0-
01
8
Product Description
4.2
LED indicators and control buttons
There are 3 LEDs and 3 programming buttons on the top of the PMI360D-F130....
The middle "Power ON" LED is green and lights up when the position measuring system is con
-
nected to the supply voltage. The two "S1" and "S2" LEDs are yellow and serve to indicate the
status during the configuration process and in normal operation.
The programming buttons serve to configure the position measuring system. The middle S0
button is used to configure the "zero point" of the analog output and the outer "S1" and "S2"
buttons are used to configure the switching points of the sensor's two switching output stages.
The "S1" and "S2" LEDs correspond in each case to the "S1" and "S2" programming buttons.
4.3
Scope of supply
•
PMI360D-F130-IE8-V15
•
Mounting screws
•
Manual
A
Display LEDs
B
Programming teach-in buttons
B
A