20
27
57
2
02
0-
01
12
Installation
5.3
Electrical connection
When connecting the sensor electrically, proceed as follows:
Electrical connection
1.
To connect the sensor electrically, use one of the cables listed in the chapter entitled
Accessories with an M12 x 1 5-pin connector.
2.
Make sure when laying electrical cables that you have the cable at the correct orientation for
connection.
3.
Make sure when routing cables that they are sufficiently spaced away from other current-
carrying system parts. This is the only way of ensuring adequate protection against short
circuits and/or crosstalk.
4.
Before connecting the cable to the sensor, make sure that you have aligned the cores. On
Fuchs connectors, the core colors are assigned to the connection pins in accordance
with DIN EN 60947-5-2.
5.
Connect the cable to the sensor-side connector and tighten the union nut by hand.
6.
Connect the operating voltage.
The green "Power ON" LED on the sensor will now light up. The yellow "S1" and "S2" LEDs
can also light up, depending on the position of the target.
Match the cable colors to the connection pins in the connector in accordance with DIN
EN60947-5-2.
Connection pin
Cable color
1
Brown
2
White
3
Blue
4
Black
5
Gray
L+
I
1/BN
4/BK
2/WH
5/GY
4-20mA
3/BU
L-