81
39
68
20
13
-10
10 - EN
Universal Temperature Converter KCD2-UT2-(Ex)1
Mounting and connection
EN
If a current output is operated as a source, the load resistance must be between 0
and 550
.
Further information on connecting the UT2 can be found in the data sheet and in the operating
instructions for the K-System on our Internet page www.pepperl-fuchs.com/pa (under product
search, enter
*
UT2
*
).
5.3 Controls and indicators of the device
On the front panel of the UT2 you will find:
• LED ERR 1 (red) to indicate a fault signal at terminals 1 to 4
• LED PWR (green) to indicate the supply voltage
• serial RS 232 interface to connect to a PC for parameterisation and
diagnosis of the UT2 using
PACT
ware
TM
PWR
ERR
KCD2-UT2-
Ex1
2
4
1
3
9 10
8
6
7
5
PROGRAM
