IDENT-I • IVI-KHA6-4HRX, IVI-KHD2-4HRX
Commands
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com
D
a
te
of
i
s
s
u
e
2
7
.0
8
.2
001
24
Read bytes, Auto mode
Write bytes, Single mode
Write bytes, Auto mode
Read code carrier, Single mode
Read code carrier, Auto mode
Reset IDC, Single mode
This command applies to IDC- ... and IDC- ... -1K data carriers
Actions:
Reset IDC, Auto mode
Command:
W <HdNo><StAdrH><BytesH><CHCK><ETX>
Response:
W <Status><DB><CHCK><ETX>
Example:
Read bytes 7 to 11 in auto mode with read head 1:
Command: W 1 07 05 54h 03h
Command:
k <HdNo><StAdrH><BytesH><DB><CHCK><ETX>
Response:
k <Status><CHCK><ETX>
Command:
K <HdNo><StAdrH><BytesH><DB><CHCK><ETX>
Response:
K <Status><CHCK><ETX>
Example:
Write "P+F" to data carrier, at start-address 10, in
auto mode with read head 2:
Command: K 2 0A 03 50h 2Bh 46h 12h 03h
Command:
i <HdNo><CHCK><ETX>
Response:
i <Status><DB><CHCK><ETX>
Command:
I <HdNo><CHCK><ETX>
Response:
I <Status><DB><CHCK><ETX>
Example:
Read all data in auto mode with read head 1:
Command: I 1 7Ah 03h
both IDCs:
Deletes all word-attribute bits.
IDC- ... only:
Writes "AAAB" for data words 0-E, and "AAAA" for
data word F.
Command:
h <HdNo><CHCK><ETX>
Response:
h <Satus><CHCK><ETX>
Command:
H <HdNo><CHCK><ETX>
Response:
H <Status><CHCK><ETX>
Example:
With read head 1 near the data carrier, use "Reset IDC" in auto
mode: Command: H 1 79h 03h
