Pepperl+Fuchs IVI-KHA6-4HB5 Manual Download Page 40

Page: 40 / 60

IDENT-I • IVI-KHD2-4HB5, IVI-KHA6-4HB5
Commissioning an S5 135U with INTERBUS-S interface

Subject to reasonable modifications due to technical advances.

Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com

11.4

Program

11.4.1 Logical addressing on startup

The logical addressing of the INTERBUS-S System is activated via the FB 210 func-
tion block. It includes an initialization block (INITIB), two driver blocks (REQ/RES,
CON/IND), an auxiliary block (CIH) and the addressing block (ADDRESS).

11.4.2 Cyclic program OB1

The INTERBUS-S System is started here. The addressing block transmits the logical
address lists for the purpose of checking the interface module.

Following the logical addressing, the application can access the defined module
addresses.

As the message driver (CON/IND) is cyclically accessed, the messages are not disab-
led.

The function of the system can be monitored via the diagnosis register (diagnose-bit/
parameter-register).

The base address set as window 3 on the INTERBUS-S interface unit
is to be used as parameter FEN3 of the FB 60 function block.

Used blocks:

FB 210

Start

FB 60

INITIB

Initialization block

FB 62

CON/IND

Driver block

FB 66

REQ/RES

Driver block

FB 63

CIH

Auxiliary block

FB 72

ADDRESS

Addressing block

FB 11

ANWEND

Application

Used data blocks:

DB 9

Interbus-S block

DB 10

Ident-Code list

DB 11

Bus segment list

DB 12

IN-address list

DB 13

OUT-address list

Summary of Contents for IVI-KHA6-4HB5





























































Search results

Summary of Contents for IVI-KHA6-4HB5

Reviews:

Brands by name

Popular brands

Pepperl+Fuchs IVI-KHA6-4HB5, Manual

Search results

Summary of Contents for IVI-KHA6-4HB5

Reviews:

Brands by name

Popular brands