Pepperl+Fuchs IC-HH20-V1, Manual, Page: 50 / 116

2597
78 2013-
02
50
IC-HH20-V1
Software description PF_Ident
Description of menu entries
Data formats
Assign button submenu
Description of the submenu
Assign button
In the Assign button submenu, you can assign the command from the higher
level menu to the function buttons on the handheld device and the buttons on the
handle.
Caution! The function buttons remain disabled until you exit the Assign button
submenu.
Data format Notes Format
ASCII In ASCII format, numbers 0 to 9,
letters A to Z and special
characters stored in the Handheld
are available.
xxxx (per block)
HEX In hexadecimal data format,
numbers 0 to 9 and letters A to F
are available.
xx xx xx xx
(spaces are not required)
(per block)
DEC In decimal data format, numbers 0
to 255 are available.
xxx xxx xxx xxx
(spaces are not required)
(per block)
Note!
Changing the data format
Changes to the data format in this menu modify the basic settings
Settings > Data format of the handheld device. Read and written data adopts
the data format selected in this menu.
Submenu --
Menu entry Left
Right
Handle