Installation
2597
78 2013-
02
19
5.2
Handle attachment
Attaching the standard handle
Proceed as follows to attach the grip to the handheld device:
1. Insert the handheld device with battery into the bracket on the handle.
2. Slide back the handheld device until the connector on the handle engages in
the cable connector socket on the handheld device.
3. Push the handheld device firmly onto the connector until it is flush with the
handle.
The handheld device is attached to the handle.
Fitting a handle with cable connection
Fit the handle to the Handheld as follows:
1. Remove the battery from the battery compartment of the Handheld if neces-
sary.
2. Carefully pull the rear, flexible part of the handle attached to the plug
downwards.
3. Attach the cable connection socket on the Handheld to the plug on the
handle.
4. Slide the plastic tab on the battery into the corresponding recess on the
Handheld.