AS-i 3.0 PROFINET Gateway in Stainless Steel
Electrical connection
31
.1.
201
4
29
7.7
Chip card
The configuration is stored in a fixed installed EEPROM and can be overwritten
by the chip card. The chip card does not have to be inserted in operation.
7.7.1
Using the chip card
The chip card integrated in the AS-i master is used to read-out and to store confi-
guration data.
7.7.1.1
Card unformatted
If an unformatted card is found when the device is started, the following is display-
ed:
The chip card is formatted and then the data copied to the chip card.
7.7.1.2
Data not compatible
If a card is found whose data are incompatible with the device, the following error
message is displayed:
7.7.1.3
Card empty
The following message is displayed for an empty card:
Warning!
Power must always be turned off when removing or inserting the chip card!
NEW CHIPCARD
WILL BE FORMATED
AS-I DATA WILL
BE SYNCHRONIZED
CHIPCARD NOT
COMPATIBLE
