Subnet Mask
Subnet Mask
⚠
This is a global value; when the VLAN is saved as Default VLAN it will be synchronised with
InControl and applied to all the devices with a tag “SD switches” in the same InControl group!
*
The IP address (optional) and the IP address for inter VLAN routing can be defined for each
VLAN. The IP addresses need to be in the same subnet.
The Inter VLAN routing IP address is dedicated for the switch, it cannot be used by any other
device. Clients will use this IP address as the gateway for routing purposes.
The Inter-VLAN routing IP is the switches router interface on that VLAN.
Each VLAN needs the switch to have a router interface for inter-VLAN routing to work.
Standalone menu options > Configure > STP
Spanning Tree Protocol (STP) uses Spanning Tree Algorithm to avoid network loops in layer 2 devices.
STP works when multiple switches are used with redundant links avoiding Broadcast Storms, Multiple
Frame Copies & Database instability.
The priority field specifies the bridge priority for root switch election.
The switch with the lowest bridge priority is elected as the root switch (Default value: 32768).
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
