InControl Configuration
There are two ways to configure the Peplink Switch.
Through InControl, Peplink’s cloud-based device management and monitoring application, or through the
web admin interface.
This section describes an overview of the InControl settings and information specific to the Peplink
Switch.
For a complete overview of InControl options, please refer to our InControl documentation.
Add the Switch to InControl
1: Logon to InControl and create a separate group for your Peplink switch.
Add the switch serial number and follow the onscreen instructions.
2: Connect an active ethernet connection to one of the numbered switch ports 1 to 24.
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
