VLANs configured on a device but not on InControl are "device managed", which means that
InControl will not manage them.
VLANs configured on both a device and InControl are "InControl managed", which means that:
InControl will control their Name and Captive Portal settings.
Their IP and DHCP settings will be kept intact.
When a VLAN is removed from InControl, it will be removed from the device as well.
If a VLAN gets defined on InControl, but not yet on the device, it will be defined on the device as well.
Its IP address will follow the Default IP Address setting.
The DHCP server will be enabled with default settings.
When a Switch is added to a group in InControl, a Management Port and Management VLAN are
imported from the local Switch to InControl.
By default, this VLAN is applied on any device that is added to this group.
Each VLAN can be applied to a selection of devices in the group by using tags.
Tags can be configured in the device details.
Detailed management VLAN network settings:
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
