peplink Pepwave MAX Series, User Manual

Page: 122 / 218

https://www.peplink.com Copyright @ 2021 Pepwave
connections are blocked except those connecting to the ISP’s. Pepwave routers support
intercepting and redirecting all outgoing SMTP connections (destined for TCP port 25) via a
WAN connection to the WAN’s corresponding SMTP server.
To enable the feature, select
Enable
under
SMTP Forwarding Setup
. Check
Enable
Forwarding
for the WAN connection(s) that needs forwarding. Under
SMTP Server
, enter the
ISP’s e-mail server host name or IP address. Under
SMTP Port
, enter the TCP port number for
each WAN.
The Pepwave router will intercept SMTP connections. Choose a WAN port according to the
outbound policy, and then forward the connection to the SMTP server if the chosen WAN has
enabled forwarding. If the forwarding is disabled for a WAN connection, SMTP connections for
the WAN will be simply be forwarded to the connection’s original destination.
Note
If you want to route all SMTP connections only to particular WAN connection(s), you should create a
custom rule in outbound policy (see Section 14.2 ).
23.3.2 Web Proxy Forwarding
When this feature is enabled, the Pepwave router will intercept all outgoing connections
destined for the proxy server specified in Web Proxy Interception Settings , choose a WAN
connection with reference to the outbound policy, and then forward them to the specified web