peplink Pepwave MAX Series User Manual Download Page 158

Page: 158 / 218

https://www.peplink.com

Edit Schedule Profile

Enabling

Click this checkbox to enable this schedule profile. Note that if this is disabled, then

any associated features will also have their scheduling disabled.

Name

Enter your desired name for this particular schedule profile.

Schedule

Click the drop-down menu to choose pre-defined schedules as your starting point.

Please note that upon selection, previous changes on the schedule map will be

deleted.

Schedule Map

Click on the desired times to enable features at that time period. You can hold your

mouse for faster entry.

28.5

Email Notification

Email notification functionality provides a system administrator with up-to-date information on

network status. The settings for configuring email notifications are found at

System>Email

Notification

Summary of Contents for Pepwave MAX Series




































































































































































































Search results

Summary of Contents for Pepwave MAX Series

Reviews:

Related manuals for Pepwave MAX Series

Brands by name

Popular brands

peplink Pepwave MAX Series, User Manual

Search results

Summary of Contents for Pepwave MAX Series

Reviews:

Related manuals for Pepwave MAX Series

Brands by name

Popular brands