peplink Pepwave MAX Series, User Manual

Page: 49 / 218

https://www.peplink.com Copyright @ 2021 Pepwave
Health Check Settings
Health Check
Method
This setting allows you to specify the health check method for the cellular connection.
Available options are
Disabled, Ping, DNS Lookup, HTTP,
and
SmartCheck
. The
default method is DNS Lookup . See Section 10.4 for configuration details.
Timeout
If a health check test cannot be completed within the specified amount of time, the test
will be treated as failed.
Health Check
Interval
This is the time interval between each health check test.
Health Check
Retries
This is the number of consecutive check failures before treating a connection as down.
Recovery
Retries
This is the number of responses required after a health check failure before treating a
connection as up again.
Dynamic DNS Settings
Dynamic DNS
Service
Provider
This setting specifies the dynamic DNS service provider to be used for the WAN based
on supported dynamic DNS service providers:
● changeip.com
● dyndns.org
● no-ip.org
● tzo.com
● DNS-O-Matic
Select Disabled to disable this feature. See Section 9.5 for configuration details.
MTU
MTU
This field is for specifying the Maximum Transmission Unit value of the WAN connection.
An excessive MTU value can cause file downloads stall shortly after connected. You may
consult your ISP for the connection's MTU value.