52 User's Manual
PCI Configuration setup
This category specifies the value (in units of PCI bus blocks) of the
latency timer for this PCI bus master and the IRQ level for PCI device.
Power-on with BIOS defaults
Load BIOS Defaults
BIOS defaults loads the values required by the system for the maximum
performance. However, you may change the parameter through the
Option Setup Menu.
Load Setup Defaults
Setup defaults loads the values required by the system for the mini-
mum performance. However, you may change the parameter through
the Setup Menu.
IDE HDD auto detection
Automatically configure IDE hard disk drive parameters.
Password setting
Change, set, or disable password. It allows you to limit access to the
system and Setup, or just to Setup.
Save & Exit setup
Save CMOS value change to CMOS and exit setup
Exit without saving
Abandom all CMOS value changes and exit setup.
