User's Manual 75
"DISPLAY SWITCH IS SET INCORRECTLY"
Display switch on the mainboard can be set to either monochrome or color.
This indicates the switch is set to a different than indicated in Setup. Deter-
mine which setting is correct, and then either turn off the system and change
the jumper, or enter Setup and change the VIDEO selection.
"FLOPPY DISK(S) fail (80)"
Unable to reset floppy subsystem
"FLOPPY DISK(S) fail (40)"
Floppy type dismatch
"Hard Disk(s) fail(80)"
HDD reset failed
"Hard Disk(s) fail(40)"
HDD controller diagnostics failed
"Hard Disk(s) fail(20)"
HDD initialization error
"Hard Disk(s) fail(10)"
Unable to recalibrate fixed disk
"Hard Disk(s) fail (08)"
Sector Verify failed
"Keyboard is locked out"
BIOS detect the keyboard is locked. P17 of keyboard controller is pulled
low.
"Keyboard error or no keyboard present"
Cannot initialize the keyboard. Make sure the keyboard is attached cor-
rectly and no keys are being pressed during the boot.
"BIOS ROM checksum error - System halted"
The checksum of ROM address F0000H~FFFFFH is bad.
"Memory test fail"
BIOS reports the memory test fail if the onboard memory is tested error.
