4
Playback
61
Connect the camera to a computer using the provided
USB cable I-USB7.
1
Turn the computer on.
2
Turn the camera off.
3
Open the terminal cover of the camera, and connect
the USB cable to the PC/AV terminal.
4
Connect the USB cable to the USB port of
the computer.
5
Turn the camera on.
The camera is recognized as a removable disk.
If the “Q-S1” dialog appears when the camera is turned on,
select [Open folder to view files] and click the OK button.
6
Save the captured images to the computer.
7
Disconnect the camera from the computer.
u
Caution
• The camera cannot be operated while it is connected
to a computer. To operate the camera, terminate the USB
connection on the computer, then turn off the camera
and remove the USB cable.
t
Memo
• Refer to “Operating Environment for USB Connection and
Provided Software” (p.92) for system requirements to
connect the camera to a computer and to use the software.
• The USB connection mode when connecting the camera
to a computer can be set in [USB Connection] of [Interface
Options] in the
D
2 menu. Normally, you do not need
to change the default setting ([MSC]).
Connecting the Camera
to a Computer
e_kb560_om.book Page 61 Friday, August 22, 2014 7:35 AM
Summary of Contents for QS-1
Page 109: ......
