Pentax Optio A30 Operating Manual Download

Page: 79 / 203

Tak

ing Pi

cture

You can switch the Drive mode to [Continuous Shooting] mode. Pictures
are taken continuously while the shutter release button is pressed.

Press the four-way controller (

) in Capture mode.

Press the four-way controller
(

) to select

(Continuous

Shooting).

Press the OK button.

The camera is ready for continuous shooting.

Press the shutter release button
halfway.

The focus frame on the LCD monitor will light green when the camera
is in focus.

Press the shutter release button fully.

Pictures are taken continuously while pressing the shutter release button.
Shooting stops when you release the shutter release button.

Continuous Shooting
(Continuous Shooting Mode)

• You can continue shooting until the SD Memory Card or the built-

in memory is full.

• The interval will vary depending on the Recorded Pixels and

Quality Level settings.

• The flash will not discharge in Continuous Shooting mode.
• Continuous shooting is not available in Movie and Frame

Composite mode.

• The focus, exposure and white balance are detemined in the first

frame.

Shutter release button

Four-way controller

OK button

Drive Mode

Continuous Shooting

Drive Mode

Continuous Shooting

Downloaded From camera-usermanual.com Pentax Manuals

Summary of Contents for Optio A30












































































































































































































Search results

Summary of Contents for Optio A30

Reviews:

Related manuals for Optio A30

Brands by name

Popular brands

Pentax Optio A30, Operating Manual

Search results

Summary of Contents for Optio A30

Reviews:

Related manuals for Optio A30

Brands by name

Popular brands