Pentax Optio A30 Operating Manual Download

Page: 24 / 203

Gettin

Sta

rte

Data Backup

Very occasionally, data stored in the built-in memory becomes unreadable. As a

backup measure, we recommend that you download important data to a PC or store

the data in a medium other than the built-in memory.

Precautions When Using an SD Memory Card

• Make sure that the camera is turned off before opening the battery/card cover.

• The SD Memory Card is equipped with a write-protect switch.

Setting the switch to [LOCK] protects the existing data by

prohibiting recording of new data, deletion of existing data or

formatting of the card.

• Care should be taken if you remove the SD Memory Card

immediately after using the camera, as the card may be hot.

• Do not remove the SD Memory Card or turn the camera off

while data is being recorded on the card, images or sound are

being played back, or the camera is connected to a PC with

the USB cable as this may cause the data to be lost or the card to be damaged.

• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from

water and store away from high temperature.

• Be sure to format unused cards or cards that have been used in another camera.

Refer to “Formatting an SD Memory Card or the Built-in Memory” (p.162) for

instructions on formatting.

• Do not remove the SD Memory Card during formatting as this may damage the

card and render it unusable.

• The data on the SD Memory Card may be deleted in the following circumstances.

PENTAX does not accept any liability for data that is deleted

(1) when the SD Memory Card is mishandled by the user.

(2) when the SD Memory Card is exposed to static electricity or electrical interference.

(3) when the card has not been used for a long time.

(4) when the card is ejected, the AC adapter is disconnected or the battery is

removed while the data on the card is being recorded or accessed.

• The SD Memory Card has a limited service life. If it is not used for a long time, the

data on the card may become unreadable. Be sure to regularly make a backup of

important data on a PC.

• Avoid using or storing the card where it may be exposed to static electricity or

electrical interference.

• Avoid using or storing the card in direct sunlight or where it may be exposed to

rapid changes in temperature or to condensation.

• When using an SD Memory Card with a slow recording speed, recording may stop

while you are taking movies even when there is adequate space in the memory, or

shooting and playback may take a long time.

• Before purchasing a SD Memory Card, please check the PENTAX website to

ensure that it is compatible with your camera. You can also contact the nearest

PENTAX service center for this information.

• If you are going to discard, give away or sell your SD Memory Card, you should

ensure that the data on the card is completely deleted or the card itself is destroyed

if it contains any personal or sensitive information. Please note that formatting the

SD Memory Card will not necessarily delete the data so that it cannot be recovered

using off-the-shelf data recovery software. There are off-the-shelf secure data

deletion software programs available that will completely delete the data. In any

case, the data on your SD Memory Card should be managed at your own risk.

Write-protect switch

Downloaded From camera-usermanual.com Pentax Manuals

Summary of Contents for Optio A30












































































































































































































Search results

Summary of Contents for Optio A30

Reviews:

Related manuals for Optio A30

Brands by name

Popular brands

Pentax Optio A30, Operating Manual

Search results

Summary of Contents for Optio A30

Reviews:

Related manuals for Optio A30

Brands by name

Popular brands