Pentax K-01, Operating Manual

Page: 141 / 272

139
S
h
oot
ing
S
et
tings
5
1
Press the
M
button in standby mode.
The control panel appears.
2
Use the four-way controller ( 2345 ) to select [Distortion
Correction] or [Lat-Chromatic-Ab Adj], and press the 4
button.
The [Distortion Correction] or [Lat-Chromatic-Ab Adj] screen appears.
3
Use the four-way controller (
45
)
to select [Off] or [On].
4
Press the
4
button.
The camera returns to the control panel.
• Corrections can only be made when using DA, DA L, D FA or some FA
lenses. [Distortion Correction] and [Lat-Chromatic-Ab Adj] cannot be
selected when an incompatible lens is attached. (p.232)
• The Distortion Correction function is disabled when a DA FISH-EYE 10-
17mm is used.
• The Lens Correction function is disabled when using an accessory such as a
close-up ring or rear converter that is attached between the camera and the
lens.
• The shooting speed for Continuous Shooting may be slower when using the
Distortion Correction function.
• The effects of the Lens Correction function may be barely noticeable in some
cases due to the shooting conditions or other factors.
• When a compatible lens is attached and the file format is set to [RAW] or
[RAW+], the correction information is saved as a RAW file parameter and you
can select [On] or [Off] when developing the RAW images. (p.175)
• You can also set [Distortion Correction] and [Lat-Chromatic-Ab Adj] in [Lens
Correction] (p.69) of the [ A Rec. Mode 1] menu.
Distortion Correction Distortion Correction
On
On
OK OK
OK
Cancel Cancel
MENU