Pentax 645D Operating Manual Download Page 57

Page: 57 / 160

Shoo

ting F

unct

ions

You can create a composite picture by taking multiple frames.
Set this in the [

2] menu. (

p.R17)

Caution

• When Multi-exposure is set, Interval Shooting and Extended

Bracketing are not available.

• Multi-exposure cannot be used with Extended Bracketing or HDR

Capture at the same time. The mode set last is used.

• [Lens Correction] in the [

2] menu is disabled when Multi-

exposure is set.

This raises the mirror. You can use this function with another
drive mode.

Turn the

dial.

The camera is ready to raise the
mirror.

Press the shutter release button fully.

The mirror is raised.

Press the shutter release button fully again.

The picture is taken and the mirror is lowered.
To exit mirror lock-up shooting, return the

dial to its original

position.

Memo

• The mirror will be lowered automatically about one minute after

being raised.

Caution

• Turning the mode dial or adjusting the lens aperture ring when the

mirror is raised lowers the mirror.

• Preview is not available when the mirror is raised.
• The mirror will not be raised during Interval Shooting even when

the

dial is set to the “UP” position.

Multi-exposure

Mirror Lock-up

M.UP

e_kb487.book Page 55 Wednesday, December 8, 2010 9:49 AM

Summary of Contents for 645D

































































































































































Search results

Summary of Contents for 645D

Reviews:

Related manuals for 645D

Brands by name

Popular brands

Pentax 645D, Operating Manual

Search results

Summary of Contents for 645D

Reviews:

Related manuals for 645D

Brands by name

Popular brands