Pentax 645D Operating Manual Download Page 56

Page: 56 / 160

Shoo

ting F

unct

ions

This camera has the following two types of self-timer modes.

Select

in the [Drive Mode] screen.

Press the

key, use the

key to select

and press the

button.

Press the shutter release button fully.

When

is selected, the self-timer lamp on the front of the camera

starts blinking slowly and blinks rapidly 2 seconds before the
shutter is released. A beep is heard and the rate increases.

This camera has the following three types of remote control
shooting modes for use with the optional Remote Control F or
Remote Control Waterproof O-RC1.

Select

in the [Drive Mode] screen.

Press the

key, use the

key to select

, and press the

button.

The self-timer lamp blinks.

Memo

• When using the Remote Control Waterproof O-RC1, you can use

the

button on the remote control to enable autofocus.

By specifying the shooting time and interval, you can capture up
to 999 images with Interval Shooting.
Set this in the [

2] menu. (

p.R17)

Caution

• Interval Shooting is not available when the exposure mode is set to

or when Extended Bracketing or HDR Capture is set.

Self-timer Shooting

Shutter is released after about 12 seconds.

Mirror is raised and shutter is released after about 2 seconds.

Remote Control Shooting

Releases shutter immediately.

Mirror is raised and shutter is released after 3 seconds.

Continuous shooting starts when the shutter release button on
the remote control unit is pressed. Press it again to stop
shooting.

Drive Mode

Self-timer (12 sec.)

Cancel

MENU

Interval Shooting

Drive Mode

Remote Control

Cancel

MENU

e_kb487.book Page 54 Wednesday, December 8, 2010 9:49 AM

Summary of Contents for 645D

































































































































































Search results

Summary of Contents for 645D

Reviews:

Related manuals for 645D

Brands by name

Popular brands

Pentax 645D, Operating Manual

Search results

Summary of Contents for 645D

Reviews:

Related manuals for 645D

Brands by name

Popular brands