Pentax 19411, User Manual

Page: 68 / 286

67
Bas
ic O
p
er
at
ions
3
The [Input Focal Length] setting menu appears when the camera is turned
on with the Shake Reduction switch on and a type of lens that does not
support automatic acquisition of lens information such as focal length
(p.65) is mounted.
Set [Focal Length] manually on the [Input Focal Length] setting menu.
1
Use the four-way controller
(
45
) or the rear e-dial to set
[Focal Length].
Select from the following 34 focal length
values. (The default setting is 35.)
2
Press the 4 button.
The camera is ready to take a picture.
Setting the Shake Reduction Function
• The [Input Focal Length] setting menu does not appear when using a lens
that supports automatic acquisition of lens information such as focal length
because [Focal Length] is set automatically.
• When using a lens without the
s
position on the aperture or with the aperture
set to a position other than the
s
position, set [36. Using aperture ring] on
the [
A
Custom Setting] menu to [Permitted].
8 10 12 15 18 20 24 28 30 35
40 45 50 55 65 70 75 85 100 120
135 150 180 200 250 300 350 400 450 500
550 600 700 800
• If the focal length for your lens is not listed above, select the value closest to
the actual focal length (example: [18] for 17 mm and [100] for 105 mm).
• When using a zoom lens, select the actual focal length at the zoom setting in
the same manner.
• Effect of Shake Reduction is influenced by the shooting distance as well as
focal length information. The Shake Reduction function may not perform as
expected when shooting at close ranges.
To change the [Focal Length] setting, use [Input Focal Length] on the [
A
Rec.
Mode] menu. (p.72)
I n p u t F o c a l L e n g t h
135
120
100
F o c a l L e n g t h
MENU
O K C a n c e l OK