Pentax 19411, User Manual

Page: 165 / 286

164
Shoot
ing Se
tti
ngs
6
6
Press the shutter release button
fully.
Slide the focus mode lever to
\
when
the shutter cannot be released.
The screen to select the measuring range
is displayed.
7
Use the rear e-dial to select the entire screen or spot area
for the measuring range.
8
When a spot area is selected, use the four-way controller
(
2345
) to move the frame to the area you want to
measure.
9
Press the 4 button.
The White Balance fine-tuning screen
appears when measuring is completed.
Tune using steps in “Fine-Tuning the
White Balance” if fine-tuning is
necessary. (p.162)
10
Press the 4 button.
The camera returns to the White Balance screen.
11
Press the 4 button.
The camera is ready to take a picture with the set White Balance.
• No image is recorded when the shutter release button is pressed to adjust
the white balance. Press the { button to save the background image as a
JPEG image. The image save confirmation screen appears. Select [Save as]
and press the 4 button.
• [NG] appears when measuring is unsuccessful. Press the 4 button while
displayed to return to the White Balance fine tune screen for remeasuring.
• If the picture is extremely overexposed or underexposed, white balance may
not be adjusted. In this case, adjust appropriate exposure and adjust the
white balance.
O K O K O K
OK
± 0 ± 0 ± 0 ± 0
± 0 ± 0 MENU
G G
B B A A A
M M
SHUTTER
O K O K O K OK C a n c e l C a n c e l C a n c e l
M a n u a l M a n u a l
W h i t e B a l a n c e
W h i t e B a l a n c e
M a n u a l
W h i t e B a l a n c e