Pentax 19411 User Manual Download Page 98

Page: 98 / 286

Shoot

ing Funct

ions

The shutter speed is locked at 1/180 seconds. Use this when using an
External flash that does not automatically change the shutter speed.

Set the mode dial to

Using the

(Flash X-Sync Speed) Mode

• Turn the rear e-dial to adjust the aperture value.
• Press the Green button to retain the shutter speed at 1/180 sec and

automatically adjust the aperture.

• When the sensitivity is set to [AUTO] and exposure mode is set to

(Flash

X-sync speed) mode, the sensitivity is the lowest sensitivity set in “Setting the
Range of Automatic Correction in AUTO” (p.78).

Summary of Contents for 19411































































































































































































































































































Search results

Summary of Contents for 19411

Reviews:

Related manuals for 19411

Brands by name

Popular brands

Pentax 19411, User Manual

Search results

Summary of Contents for 19411

Reviews:

Related manuals for 19411

Brands by name

Popular brands