80
Tak
ing Pi
cture
s
4
In self-timer mode, the picture is taken ten seconds or two seconds after
the shutter release button is pressed.
1
Press the four-way controller (
2
) in Capture mode.
2
Press the four-way controller
(
45
) to select
g
(Self-timer) or
(2 sec. Self-timer).
3
Press the OK button.
The camera is ready for taking pictures using
the Self-timer.
4
Press the shutter release button halfway.
The focus frame on the LCD monitor will light green when the camera
is in focus.
5
Press the shutter release button fully.
The self-timer starts running.
g
(Self-timer)
: The picture is taken after the self-timer lamp
lights for about seven seconds, then blinks for
about three seconds.
(2 sec. Self-timer): The picture is taken after the self-timer lamp
blinks for about two seconds.
Using the Self-timer
Focusing may be compromised if you move the camera while the
self-timer is running.
• The countdown appears on the LCD monitor when you press the
shutter release button.
• If you press the shutter release button halfway during a countdown,
the countdown stops. Press the shutter release button fully to restart
the countdown.
Troubleshooting “Subject is not in focus”
1
Shutter release button
Four-way controller
OK button
OK
OK
OK
OK
Drive Mode
Drive Mode
Self-timer
Self-timer
Drive Mode
Self-timer
MENU
Cancel
Cancel
Cancel