192
9
App
endi
x
Messages such as the following may appear on the LCD monitor when
using the PictBridge function.
Data being recorded
This message appears when you try to switch to
Q
mode
while an image is still being recorded, or when the protect
setting or DPOF setting is being changed. It disappears
after the image is recorded or the setting is changed.
Data being processed
This message appears when the camera takes more than
five seconds to display an image due to image processing,
or when the SD Memory Card or built-in memory is being
formatted.
Built-in memory full
Displayed if the built-in memory is full when saving a file.
No image to be
processed
Displayed when there are no image or sound files.
This image/sound
cannot be processed
Displayed for files that cannot be processed.
No card in the camera
Displayed when no SD card is inserted.
The
built-in memory is not
enough to copy
images/sounds
Displayed when there is insufficient built-in memory to
perform copying.
Cannot process
correctly
Displayed when Red-eye Compensation processing fails.
Display image/sound
from
built-in memory
Displayed when the camera enters built-in memory display.
Green mode must be
canceled to use this
function.
Displayed when you try to use a function not supported by
the Green Mode.
Message
Description
Low paper level in the
printer
The paper level of the printer is low.
No paper in the printer
There is no paper in the printer.
Paper stuck in the printer
The paper is stuck in the printer.
Low ink level in the printer
The ink level of the printer is low.
No ink in the printer
There is no ink in the printer.
Printer error
An error message has been sent from the printer.
Data error
A data error message has been sent from the printer.
Connection error
Check printer
Displayed when a PictBridge connection fails.
Printing now
Displayed when printing is being executed.
Printing is completed.
Continue printing?
Displayed when printing completes.
Summary of Contents for 19321
Page 210: ...Memo ...