background image

74

T

aking Pictures

Saving the Menu Items (Memory)

You can choose whether you want the set values to be saved when the
camera is turned off. If you select 

[On], the settings will be saved in

the status they were in immediately before the camera was turned off. If
you select 

[Off], the settings will be reset to the defaults when the

camera is turned off.

• Menu items not included in [Memory] will also be saved in the

settings selected on the menus for each function when the
camera is turned off.

• The zoom position setting in the digital zoom range will not

be saved even if [Zoom Position] is set to On in [Memory].

• [Memory] can be set separately in User mode and other

shooting modes.

Saving the Settings (Memory)

memo

Flash

Default Setting

The flash mode setting on the    button is saved.

Focus Mode

The focus mode setting is saved.

Item

Description

White Balance

The [White Balance] setting on the [Rec.Mode] menu
is saved.

AE Metering

The [AE Metering] setting on the [Rec.Mode] menu is
saved.

File #

The file number is saved. If a new SD Memory Card/
MultiMediaCard is inserted,the sequential file number
is assigned.

Digital Zoom

The [Digital Zoom] setting on the [Rec.Mode] menu is
saved.

Sensitivity

The [Sensitivity] setting on the [Rec.Mode] menu is
saved.

Zoom Position

The zoom position setting is saved.

DISPLAY

The LCD monitor display mode is saved.

EV Compensation

The set EV compensation value is saved.

MF

The manual focus position is saved.

Summary of Contents for 18263 - OptioS Digital Camera











































































































































Reviews: