Pentax 18263 - OptioS Digital Camera Operating Manual Download Page 124

Page: 124 / 138

122

Settings

You can set the alarm to ring at a specified time and display a
selected image.

Checking the Alarm

Press the MENU button.

Press the four-way controller (

The [

Playback] menu will be displayed.

Press the four-way controller (

) to select [Alarm].

Press the four-way controller (

The list of alarms will be displayed.
Active alarms are indicated by

Press the OK button twice.

If any alarms are enabled, the camera will be turned off and
the alarms will be set.

Setting the Alarm

Press the MENU button.

Press the four-way controller (

The [

Playback] menu will be displayed.

Press the four-way controller (

) to select [Alarm].

Setting the Alarm

Four-way controller
(OK button in the center)

Menu button

Alarm

Exit

MENU

Once

5:30

Everyday

7:30

Off

0:00

Summary of Contents for 18263 - OptioS Digital Camera











































































































































Search results

Summary of Contents for 18263 - OptioS Digital Camera

Reviews:

Related manuals for 18263 - OptioS Digital Camera

Brands by name

Popular brands

Pentax 18263 - OptioS Digital Camera, Operating Manual

Search results

Summary of Contents for 18263 - OptioS Digital Camera

Reviews:

Related manuals for 18263 - OptioS Digital Camera

Brands by name

Popular brands