Pentax 18263 - OptioS Digital Camera Operating Manual Download Page 18

Page: 18 / 138

Getting Star

ted

This camera uses an SD Memory Card and MultiMediaCard.
Captured images are recorded on the SD Memory Card/
MultiMediaCard if a card is inserted (

icon on the LCD monitor),

or in the Built-in memory if no card is inserted (

icon on the LCD

monitor). Make sure that the camera is turned off before inserting
or removing the SD Memory Card/MultiMediaCard.

Open the battery/card cover.

Insert SD Memory Card/MultiMediaCard so the label
(the side with the

symbol) is facing toward the LCD

monitor and push the card in until it clicks.

Close the battery/card cover.
To remove the card, eject the card by pressing it in the direc-
tion indicated by the arrow and pull it out.

Approximate Number of Recordable Images and
Recorded pixels/Quality levels

•

The above table indicates the number of images when using a 16MB
SD Memory Card.

•

The above table is based on standard shooting conditions specified by
PENTAX and may vary depending on the subject, shooting conditions,
capture mode, SD Memory Card, etc.

Installing the SD Memory Card/MultiMediaCard

Battery/Card cover

SD Memory Card/
MultiMediaCard

To remove the card,
push and pull out

Quality levels

Recorded pixels

Best

(

)

Better
(

)

Movie images

(320

240)

1600

1200

1024

768

30 sec.

sets

640

480

2048

1536

Good

(

)

119

Summary of Contents for 18263 - OptioS Digital Camera











































































































































Search results

Summary of Contents for 18263 - OptioS Digital Camera

Reviews:

Related manuals for 18263 - OptioS Digital Camera

Brands by name

Popular brands

Pentax 18263 - OptioS Digital Camera, Operating Manual

Search results

Summary of Contents for 18263 - OptioS Digital Camera

Reviews:

Related manuals for 18263 - OptioS Digital Camera

Brands by name

Popular brands