Pentax 18263 - OptioS Digital Camera Operating Manual Download Page 27

Page: 27 / 138

Quic

k Star

Deleting the displayed image.

During this time you can erase
the image by pressing the
button (The Delete screen will be
displayed.), press the four-way
controller (

) to select [Delete],

and then pressing the OK button.
Press the Playback button again
or press the shutter release but-
ton halfway to return to capture
mode.

• When the screen is changed to the playback screen, the

image with the largest file number will be displayed first

• You can enlarge the image displayed on the LCD monitor

by pressing the Zoom /

button.

• In the case of movie pictures, the first frame will be dis-

played.

• If there are no images stored, the [No image&sound] mes-

sage will be displayed.

Zoom Display

☞

p.79

memo

100-0020

Cancel

Delete

Exit

MENU

All Images Sound

File No.

Summary of Contents for 18263 - OptioS Digital Camera











































































































































Search results

Summary of Contents for 18263 - OptioS Digital Camera

Reviews:

Related manuals for 18263 - OptioS Digital Camera

Brands by name

Popular brands

Pentax 18263 - OptioS Digital Camera, Operating Manual

Search results

Summary of Contents for 18263 - OptioS Digital Camera

Reviews:

Related manuals for 18263 - OptioS Digital Camera

Brands by name

Popular brands