Pentax 17491 Page 261 Operating Manual Download

Page: 261 / 272

259

Ap
pe
n

Shooting modes

Auto Picture, Sport, Digital SR, Program, Shutter Priority, Aperture

Priority, Manual, USER, Landscape, Flower, Portrait, Backlight, Half-
length Portrait, Night Scene, Night Scene Portrait, Stage Lighting,

Surf & Snow, Baby, Kids, Pet, Food, Fireworks, Frame Composite,

Party, Museum, Sunset, Digital Wide, Digital Panorama, Movie, Green

Digital Filters

B&W, Sepia, Red, Pink, Purple, Blue, Green, Yellow, Soft, Color

extraction (Red, Green, Blue), Fish-eye, Brightness

Movie

Continuous

Recording Time

Approx. 1 second - until built-in memory or SD

Memory Card is full (however, maximum size is
limited to 2 GB)

Shutter Speed

1/4000 sec. - 1/4 sec., max. 4 sec. (Shutter Priority, Aperture Priority,
Manual Exposure, Night Scene mode)

Built-in Flash

Modes

Auto, Flash Off, Flash On, Auto + Red-eye, Flash
On + Red-eye, Slow-speed Sync, Slow-speed

Sync+Red-eye

Flash Range

Wide-angle:approx. 0.2 m - 9.1 m (approx. 0.66 ft

- 29.9 ft)

(Sensitivity:in Auto condition)
Telephoto: approx. 1.7 m - 5.1 m (approx. 5.6 ft -

16.7 ft)

(Sensitivity:in Auto condition)

Drive Modes

Single-frame, Continuous Shooting(L/M/H),

Self-timer (approx. 10 sec., approx. 2 sec.), Interval, Auto Bracket

Self-timer

Electronic control type, control time: Approx. 10 sec., 2 sec.

Time Function

World Time

75 cities (28 time zones)

Power Source

Rechargeable lithium-ion battery D-LI92, AC adapter kit (optional)

Battery Life

Number of

Recordable
Images

approx. 170

pictures

* Recording capacity shows approximate number

of shots recorded during CIPA-compliant testing
(with display on, flash used for 50% of the shots,

and 23 degrees centigrade).

Actual performance may vary according to
operating conditions.

Playback Time
approx. 200 min.

* According to the result of in-house testing.

Actual time may differ depending on usage

conditions.

Movie Recording

Time

approx. 70 min.

Interfaces

USB 2.0 (high-speed compatible) / PC/AV terminal/ External input

terminal

Video Output

NTSC/PAL (monaural)

Dimensions

Approx. 110.5 (W) × 82.5 (H) × 89.5 (D) mm (excluding operating or

protruding parts)

Weight

Approx. 390 g (excluding battery and SD Memory Card)

Approx. 410 g (including battery and SD Memory Card)

Accessories

Rechargeable lithium-ion battery, battery charger, AC plug cord, USB

cable, AV cable, software (CD-ROM), lens cap, strap, Operating
Manual, Quick Guide

e_kb484.book Page 259 Wednesday, March 18, 2009 5:23 PM

Summary of Contents for 17491

















































































































































































































































































Search results

Summary of Contents for 17491

Reviews:

Related manuals for 17491

Brands by name

Popular brands

Pentax 17491, Operating Manual

Search results

Summary of Contents for 17491

Reviews:

Related manuals for 17491

Brands by name

Popular brands