Pentax 17231 - Optio W60 - Digital Camera Operating Manual Download

Page: 95 / 244

Tak

ing Pi

cture

Press the shutter release button once to automatically adjust the
exposure and take three pictures in succession. After taking the pictures,

you can select the best one.

The shooting order is best exposure

→

–1.0 EV

→

+1.0 EV.

Press the four-way controller (

) in

mode.

Use the four-way controller (

)

to select

(Auto Bracket) and

press the

button.

The camera can now take pictures with
Auto Bracket.

Press the shutter release button
halfway.

The focus frame on the display turns green if the subject is in focus.

Press the shutter release button fully.

Press the shutter release button once to automatically adjust the
exposure and take three pictures.

Taking Pictures with Automatic Exposure

Adjustment (Auto Bracket)

• When the Instant Review time is set (p.120), the third image taken

is shown in Instant Review after shooting (p.44). However, the
image cannot be deleted while in Instant Review even if the

button is pressed.

• Auto Bracket is unavailable in

(Movie), (Underwater Movie),

(Voice Recording),

(Auto Picture),

(Green),

(Fireworks),

(Digital Panorama), (Digital Wide), and

(Frame Composite)

modes.

Shutter release button

Four-way controller

button

MENU

Cancel

Drive

ve Mode

Auto Bracke

cket

Drive Mode

Auto Bracket

Summary of Contents for 17231 - Optio W60 - Digital Camera





















































































































































































































































Search results

Summary of Contents for 17231 - Optio W60 - Digital Camera

Reviews:

Related manuals for 17231 - Optio W60 - Digital Camera

Brands by name

Popular brands

Pentax 17231 - Optio W60 - Digital Camera, Operating Manual

Search results

Summary of Contents for 17231 - Optio W60 - Digital Camera

Reviews:

Related manuals for 17231 - Optio W60 - Digital Camera

Brands by name

Popular brands