Pentax 17231 - Optio W60 - Digital Camera, Operating Manual, Page: 120 / 244

118
4
Tak
ing Pi
cture
s
4
Set the interval.
1 Press the four-way controller ( 5 ).
2 Use the four-way controller ( 23 ) to
set the minute, then press the four-
way controller (
5
).
3 Use the four-way controller ( 23 ) to
set the seconds, then press the four-
way controller (
5
).
The frame returns to [Interval].
5
Press the four-way controller (
3
).
The frame moves to [Number of Shot].
6
Set the number of shots.
1 Press the four-way controller (
5
).
2 Use the four-way controller ( 23 ) to set [Number of Shot], then
press the four-way controller ( 5 ).
The frame returns to [Number of Shot].
7
Press the four-way controller (
3
).
The frame moves to [Start Delay].
8
Set the start delay.
1 Press the four-way controller (
5
).
2 Use the four-way controller (
23
) to set the hour, then press
the four-way controller ( 5 ).
3 Use the four-way controller ( 23 ) to set the minute, then press
the four-way controller (
5
).
The frame returns to [Start Delay].
9
Press the
3
button twice.
The Interval Shoot setting is saved and the camera returns to the
shooting screen. The operations up to this point have only configured
the Interval Shoot settings. To actually use Interval Shoot, you must
select [Interval Shoot] from Drive Mode.
Taking Pictures at a Set Interval (Interval Shoot)
1
p.90
• Interval shooting is not available in
b
, O ,
y
, F , or mode.
• Refer to p.137 to p.139 for instructions on interval shooting for
C
and .
• Even if an alarm is set, the alarm will not ring while interval
shooting is being performed.
MENU
2
Interval Shoot
Interval
Number of Shot
Start Delay
0min 10sec
0hr 0min