background image

4

5

WhisperFlo VS 1500 

Owner’s Manual 

WhisperFlo VS 1500

 Owner’s Manual

FEATURES & BENEFITS

TECHNICAL INFORMATION

The WhisperFlo VS 1500 is the ideal pump for new or existing pools. Utilising advanced 
hydraulic design and the latest technology in permanent magnet, variable speed motors, 
the WhisperFlo VS 1500 has the perfect combination of efficiency and performance. The 
WhisperFlo VS 1500 delivers energy savings and the power when you need it. You will also 
have the peace of mind that you are doing your bit for the environment and reducing your 
carbon foot print.

•  Variable speed pump, with 4 programmable speeds, allows you to effortlessly select the 

most efficient setting to meet you filtration, cleaning and water feature needs.

•  Radial flux, brush-less permanent magnet motor delivers high efficiency and low noise 

levels.

•  Fault protected motor prevents damage by automatically shutting down the motor in 

the event of a locked rotor, under voltage, over voltage or over current condition and will 
automatically reduce the speed during an over temperature condition.

•  Precision-fit internal components and superior hydraulic design deliver effortless 

performance, energy savings and extended pump life.

•  A heavy-duty construction and a motor rated for continuous operation make the 

WhisperFlo VS 1500 a tough, long-lasting performer.

•  The high-capacity trap holds a large amount of debris, so you clean less often.

•  The Cam and Ramp

 lid is easy to remove and locks in place with a quarter turn, making 

inspection and cleaning a breeze.

•  Quick-disconnect plumbing unions.

Model Data

RPM:

 

 

 

Low 1400RPM 

 

 

Med 2200RPM  

 

 

High 3000RPM  

 

 

Override: 3150RPM

Electrical Rating:

 

 

 

230-240V 50Hz single phase

Rated Current:

 

 

 

Low: 1.0A (max) 

 

 

Med: 3.2A (max) 

 

 

High: 7.4A (max) 

 

 

Override: 8.6A

Motor Output Power (P

2

):

 

 

 

Low: 175W (max)  

 

 

Med: 560W (max) 

 

 

High: 1360W (max) 

 

 

Override: 1575W

Motor Input Power (P

1

): 

  

Low: 216W (max) 

 

 

Med: 700W (max) 

 

 

High: 1700W (max) 

 

 

Override: 1970W

IP Rating: 

 

 

IPX6

Inlet (Suction): 

 

 

ABS Barrel Union to suit 50mm PVC  

 

 

 

pressure pipe to AS/NZS 1477

Outlet (Discharge): 

 

 

ABS Barrel Union to suit 50mm PVC  

 

 

 

pressure pipe to AS/NZS 1477

Max Total Head: 

 

 

21m

Water Temperature Range: 

 

 

5°C – 40°C

Maximum Ambient temperature:   

 

55°C

Recommended pH Range: 

 

 

7.2 - 7.8 (Guide Only)

Motor: 

  

Axial flux, permanent magnet, DC

Protection: 

  

Mains over voltage, mains under voltage,    

 

 

over temperature, under temperature,  

 

 

 

locked rotor, over current, phase    

 

   disconnect.

Supply cord: 

 

 

10A, H07RNF, 2m.

Summary of Contents for WHISPERFLO VS 1500


















Reviews: