Pentair FLECK 9000 SXT, Installer Manual, Page: 94 / 118

Installer manual Fleck 9000 SXT - Maintenance
94 / 118 Ref. MKT-IM-020 / C - 21.11.2019
9.4.11 Valve on tank assembly
1. Lubricate the seals with approved silicone grease.
2. Spin the valve ( 1 ) onto the tank ( 2 ), ensuring the threads are not cross-threaded.
3. Rotate the valve ( 1 ) clockwise and freely, without using force until it comes to a stop.
Info
This stop position is considered point zero.
4. Rotate the valve ( 1 ) clockwise from point zero to between ¼ turn and ½ turn.
Caution - material
Risk of damage due to excessive force !
Do NOT exceed 27 Nm of torque when installing the valve. Exceeding this limit may
damage the threads and cause failure.
Point 0 ½ turn
Point 0
¼ turn
Point 0 ½ turn
Point 0
¼ turn