Pentair FLECK 9000 SXT, Installer Manual, Page: 52 / 118

Installer manual Fleck 9000 SXT - Programming
52 / 118 Ref. MKT-IM-020 / C - 21.11.2019
Parameter Options Definition Note
C Unit capacity 0.1 to
9’999’000
°TH*m
3
Only displayed for volumetric
regenerations.
V Filter capacity 1 to 999’900 L Only displayed for filter.
H Feedwater
hardness
1 to 1990 °TH, ppm or
grains
Only displayed for volumetric
regenerations.
RS Reserve
selection
SF Safety factor -
rc Fixed reserve
capacity
-
SF Safety factor 0 to 50 % Only available if set in reserve
selection.
RC Fixed reserve
capacity
0 to 50 % Only displayed for volumetric
regenerations and if set in reserve
selection.
DO Days override 0 to 99 Day -
RT Regeneration
time
00:00:00 to
23:59:59
Hour Regeneration time will not appear
unless regeneration day override is
on.
B1 First backwash 0 to 199 Minute Only displayed for dF2b regeneration
flow. In case of dF1b regeneration
flow, the screen shows BW.
BD Brine draw BD consist of time for brine draw and
slow rinse.
B2 Second
backwash
Only shown in dF2b regeneration flow.
RR Rapid rinse -
BF Brine fill 0 to 199 Minute -
BW Backwash -
Rn Cycle number
n=1 to 6
Only if "Othr" is chosen under VT . R1,
R2, R3, etc... will be displayed instead.
Dn Day of week,
n=1 to 7
ON - OFF - Regeneration setting for each day of
the week. OFF by default.
Not available for 9000 serie valves.
CD Current day 1 to 7 Day of the week Not available for 9000 serie valves