8
•
PENTAIR FLECK 5000 Control Valve Service Manual
MASTER PROGRAMMING MODE CHART
CAUTION
Before entering Master Programming, please contact your local professional water dealer. To enter Master
Programming, set time to 12:01 PM.
Master Programming Options
Abbreviation
Parameter
Option
Abbreviation
Options
DF
Display Format
GAL
Gallons
Ltr
Liters
Cu
Cubic Meters
VT
Valve Type
St1b
Standard Downflow/Upflow Single Backwash
St2b
Standard Downflow/Upflow Double Backwash
Fltr
Filter
UFbF
Upflow Brine First
Othr
Other
CT
Control Type
Fd
Meter (Flow) Delayed
FI
Meter (Flow) Immediate
tc
Time Clock
dAY
Day of Week
NT
Number of Tanks
1
Single Tank System
2
Two Tank System
TS
Tank in Service
U1
Tank 1 in Service
U2
Tank 2 in Service
C
Unit Capacity
Unit Capacity (Grains)
H
Feedwater Hardness
Hardness of Inlet Water
RS
Reserve Selection
SF
Percentage Safety Factor
rc
Fixed Reserve Capacity
SF
Safety Factor
Percentage of the system capacity to be used as a reserve
RC
Fixed Reserve Capacity
Fixed volume to be used as a reserve
DO
Day Override
The system’s day override setting
RT
Regen Time
The time of day the system will regenerate
BW, BD, RR, BF
Regen Cycle Step Times
The time duration for each regeneration step. Adjustable from OFF and 0-199
minutes.
NOTE:
If “Other” is chosen under “Valve Type”, then R1, R2, R3, etc, will be
displayed instead
D1, D2, D3, D4, D5,
D6, & D7
Day of Week Settings
Regeneration setting (On or OFF) for each day of the week on
day-of-week systems
CD
Current Day
The Current day of the week
FM
Flow Meter Type
t0.7
3/4 inch Turbine Meter
P0.7
3/4 inch Paddle Wheel Meter
t1.0
1 inch Turbine Meter
P1.0
1 inch Paddle Wheel Meter
t1.5
1.5 inch Turbine Meter
P1.5
1.5 inch Paddle Wheel Meter
Gen
Generic or Other Meter
K
Meter Pulse Setting
Meter pulses per gallon for generic/other flow meter
NOTE:
Some items may not be shown depending on timer configuration. The timer will discard any changes and exit Master
Programming Mode if any button is not pressed for sixty seconds.
