Pentair Evolio 255 10 Installer Manual Download

Page: 10 / 90

Installer manual Evolio 255 740-760 - Safety

10 / 90

Ref. MKT-IM-037 / D - 25.10.2021

Safety

2.1

Safety pictograms definition

DANGER

This combination of symbol and keyword indicates an imminently hazardous situation
that will result in serious or fatal injury if not avoided.

WARNING

This combination of symbol and keyword indicates a potentially hazardous situation
that can result in serious or fatal injury if not avoided.

CAUTION

This combination of symbol and keyword indicates a potentially hazardous situation
that can result in minimal or minor injury if not avoided.

Caution - material

This combination of symbol and keyword indicates a potentially hazardous situation
that can result in material damage if not avoided.

Prohibition

Mandatory advice to follow.

Mandatory

Applicable guideline, measure.

Info

Informative comment.

Summary of Contents for Evolio 255 10



























































































Search results

Summary of Contents for Evolio 255 10

Reviews:

Related manuals for Evolio 255 10

Brands by name

Popular brands

Pentair Evolio 255 10, Installer Manual

Search results

Summary of Contents for Evolio 255 10

Reviews:

Related manuals for Evolio 255 10

Brands by name

Popular brands