background image

Installer manual Evolio 255 740-760 - Safety

14 / 90

Ref. MKT-IM-037 / D - 25.10.2021

Info

Valid only for Italy

In case of equipment used in accordance with the DM25, apply all the signs and
obligations arising from the DM25.

2.4.2

Hygiene measures

 DANGER

Do not use with water that is micro-biologically unsafe or of unknown quality without
adequate disinfection before or after the softener.

 WARNING

Water softeners using sodium chloride for regeneration will add sodium to the water.

Person who are on sodium-restricted diets should consider the added sodium as part of
their overall sodium intake.

Disinfection

• The materials used for the construction of our products meet the standards for use with

potable water; the manufacturing processes are also geared to preserving these criteria.
However, the process of production, distribution, assembly and installation, may create
conditions of bacterial proliferation, which may lead to odor problems and water
contamination;

• it is therefore strongly recommended to sanitize the products. See Cleaning, disinfection and

sanitization [

Page 52];

• maximum cleanliness is recommended during the assembly and installation;

• for disinfection, use Sodium or Calcium Hypochlorite and perform a manual regeneration.

Summary of Contents for Evolio 255 10



























































































Reviews: