QuickTouch
®
II Wireless Remote Installation and User’s Guide
7
To setup QuickTouch II secure wireless remote receiver:
1.
Open up Receiver Case.
2.
Press the
White Receiver button
(shown below) - LED will flash three (3)
times (once pressed you have 60 seconds to learn).
3.
Hold down buttons 4 and 8 simultaneously.
4.
Once learned press the buttons to make sure they operate correctly.
Note: You can learn up to 8 remotes into each receiver.
QuickTouch II in “Learn” Mode
Operating QuickTouch II Wireless Remote
The spa-side remote can control up to eight system functions, depending on the system
being used (EasyTouch
®
, IntelliTouch
®
and Compool
®
). Each circuit function can be
labeled above the buttons to identify the button function. An LED indicator indicates the
circuit is active. Note: For IntelliTouch system only: IntelliTouch supports multiple spa-
side remote. For more information about connecting and configuring multiple remotes,
see page 15.
