QuickTouch
®
II Wireless Remote Installation and User’s Guide
3
Most states and local codes regulate the construction, installation, and
operation of public pools and spas, and the construction of residential
pools and spas. It is important to comply with these codes, many of which directly
regulate the installation and use of this product. Consult your local building and health
codes for more information.
SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS
PRODUCT IS NOT INSTALLED AND USED CORRECTLY.
INSTALLERS, POOL OPERATORS AND POOL OWNERS MUST
READ THESE WARNINGS AND ALL INSTRUCTIONS BEFORE
USING THE POOL AND/OR SPA LED LIGHT.
Before installing this product, read and follow all warning notices
and instructions in this Guide. Failure to follow warnings and
instructions can result in severe injury, death, or property damage.
Call (800) 831-7133 for additional free copies of these instructions. Please refer to
www.pentairpool.com for more information related to this products.
IMPORTANT NOTICE
- Attention Installer:
This Installation and User’s
Guide (“Guide”) contains important information about the installation,
operation and safe use of this underwater pool and spa light. This Guide
should be given to the owner and/or operator of this equipment.
WARNING AND IMPORTANT SAFETY INSTRUCTIONS
The SpaCommand spa-side remote must be installed by a qualified
pool professional in accordance with the National Electrical Code
(NEC), NFPA 70 or the Canadian Electrical Code (CEC), CSA C22.1.
All applicable local installation codes and ordinances must also be
adhered to. Improper installation will create an electrical hazard which
could result in death or serious injury to pool users, installers or others
due to electrical shock, and may also cause damage to property.
Always disconnect the power to the pool light at the circuit breaker
before servicing the light. Failure to do so could result in death or
serious injury to serviceman, pool users or others due to electrical
shock.
Control System is intended to control heaters with built-in high limit
circuits ONLY. Failure to do so may cause property damage or
personal injury.
Do not use this product to control an automatic pool cover.
Swimmers may become entrapped underneath the cover.
Risk of Electrical Shock or Electrocution!
Always disconnect the AC power to the control system load
center and power center at the circuit breaker before installing or
servicing the QuickTouch II wireless remote. Failure to do so
could result in death or serious injury to serviceman, pool users
or others due to electrical shock.
