7
Step 2. Attach The Seal
Your Kreepy Krauly comes equipped with one of
two seals.The Pleated seal is our universal seal and
works in
all
pool types: concrete, vinyl, fiberglass,
and tile. And our Starfish seal which is used
exclusively in concrete pools only.
To install either seal locate the words
“This Side
Up”
and face them towards the main body. Slip
the seal over the footpad – (flat side down towards
pool floor) and pull gently until it seats itself on the
other side in its groove, as illustrated in Figure 3.
The seal must be installed flat side down, pleated/
contoured side up.
Once in place, the seal should
rotate and turn freely.
The seals are not reversible.
The raised pleats on
the Pleated seal and the contours on the Starfish
seal must face upward. The flat side of the seal
should face down to rest against the pool surface.
Step 3. Attach The Roller Bumper Strap
Insert the bottom end of the strap into the slot
provided on the main body. Insert the top end of the strap into the locking clip attached to the swivel
head. See Figure 4.
Step 4. Attach The Dive Float Restrictor
Snap the dive float restrictor into the lower U-shaped brace between the dive floats. Make sure the
locking tabs on both sides of the dive float restrictor snap securely into place. See Figure 5.
Pleated/Starfish Seals in their Grooves
Flange
Dive Float
Dive Float
Restrictor
Locking
End Clip
Swivel
Head
Main
Body
Flat Tab
Main
Body
Main
Body
Pleats of
Pleated Seal
The flat side of seal faces down to rest on the pool’s surface.
(For Concrete Pools Only)
Figure 3
Figure 4
Figure 5
